Water Ionizers and reviews from Alkaline Water Plus Skip to main content

Perfect & Pure Tankless Reverse Osmosis

$474.90

Perfect & Pure Tankless Reverse Osmosis

Pure RO Water — Without the Bulky Storage Tank

The Perfect & Pure Tankless Reverse Osmosis System combines high-capacity reverse osmosis purification with a compact, modern under-sink design. Instead of slowly producing water and storing it in a conventional RO tank, this high-flow system filters your water on demand — giving you fresh RO water whenever you need it while freeing up valuable space beneath your sink.

And unlike basic reverse osmosis systems that stop after stripping dissolved substances from the water, Perfect & Pure finishes the process with remineralization, adding beneficial minerals back into the purified water for improved taste and a more balanced finished water.

Why I Like This RO System

Reverse osmosis can be an excellent solution when your source water contains high levels of dissolved minerals or contaminants that are difficult to address with conventional filtration. The problem with many traditional RO systems is their large storage tank, slow production rate, and completely demineralized finished water.

Perfect & Pure addresses all three.

  • Tankless design saves valuable under-sink space
  • High-output 1000 GPD RO membrane produces water on demand
  • Five stages of treatment combine prefiltration, RO purification, polishing and remineralization
  • 0.68 GPM flow rate provides much faster access to purified water than many conventional RO systems
  • Remineralization stage restores beneficial minerals after reverse osmosis
  • Approximately one-year filter life makes routine maintenance simple

The result is an unusually convenient RO system for drinking water, cooking, coffee and tea, ice, food preparation and other uses where exceptionally purified water is desirable.

Plus it's suitable for hooking up to a water ionizer.

Five Stages of Water Treatment

Stage 1 — Sediment Protection

The first stage captures suspended particles such as dirt, rust and sediment. Removing these larger particles first also helps protect the carbon media and RO membrane that follow.

Stage 2 — Carbon Block Filtration

Water then passes through activated carbon block media to reduce chlorine, unwanted tastes and odors, and a range of chemical contaminants such as volatile organic compounds (VOCs).

Stage 3 — High-Capacity Reverse Osmosis

At the heart of the system is a 1000-gallon-per-day reverse osmosis membrane rated for filtration down to 0.0001 micron. This is where dissolved solids and many extremely small impurities that ordinary filtration cannot capture are separated from the product water.

Because this is a high-flow tankless system, purified water is produced as you need it rather than being held in a conventional RO storage tank.

Stage 4 — Final Carbon Polishing

After reverse osmosis, the purified water receives an additional carbon treatment to further improve its taste and odor before reaching the final stage.

Stage 5 — MineralPlus Remineralization

Reverse osmosis is extremely effective partly because it removes dissolved minerals along with unwanted substances. Perfect & Pure therefore includes a final remineralization stage, which adds beneficial minerals back to the RO water.

This produces water with a more pleasant mineral balance and taste than completely demineralized RO water.

Five stages — only two cartridges. The Perfect & Pure uses an efficient two-cartridge design. Water first passes through sediment and carbon filtration, then through the high-capacity RO membrane. After reverse osmosis, the purified water travels back through the first cartridge for final carbon polishing and MineralPlus remineralization.

A Better Approach to Reverse Osmosis

Traditional reverse osmosis systems can be excellent purifiers, but they normally require a separate pressurized storage tank because they produce purified water relatively slowly.

The Perfect & Pure Tankless RO takes a different approach. Its high-capacity membrane and powered system allow it to produce purified water continuously at up to 0.68 gallons per minute, eliminating the need for a bulky storage tank.

More room under your sink. Faster water production. No RO storage tank. Freshly filtered water on demand.

Instructions

The installation, service, and maintenance of this equipment should be performed by a qualified professional. Speak with a local water dealer, plumber, or technician to correctly and safely install the system. Failure to follow general plumbing and electrical safety protocols, and/or failure to comply with the steps outlined in this manual could result in severe injury.

Warnings:

Electrical shock hazard! Ensure that the system is NOT connected to power during installation or servicing.

CAUTION!

  • This water filtration system requires electricity to run the booster pump. Do not plug the unit in until you have read through the instructions in their entirety.
  • The unit must first be connected to the cold water line and faucet, then checked thoroughly for leaks, before connecting the power transformer. Read the manual and follow all instructions.
  • Do not use the power transformer if the lines are frayed or damaged, or if the transformer is damaged. Contact your dealer for a replacement.
  • Children should be instructed not to touch or play with the filter system.

Notice

Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.

System Specifications

System Type Tankless Reverse Osmosis with Remineralization
Filtration

5 Stages - 2 Filters [#1: SCB Filter Cartridge: 4-Stage Sediment, Carbon Block, Polishing Carbon (PPC Composite Filter), and MineralPlus media. and #2 RO Membrane]

RO Membrane Capacity 1000 GPD
Rated Flow 0.68 GPM
RO Membrane Filtration Rating 0.0001 micron
Filter Life Up to 12 months or 2,040 gallons*
Incoming Water Pressure 15–80 PSI
Water Temperature 41°F–100°F (5°C–38°C)
Electrical Requirement 110V / 60Hz
Power 120W
Water Supply Cold water only
Dimensions H 13.5"  W 6"  D 16"  (package is 20x20x9 and 28 lbs)

*Actual filter life depends upon incoming water quality and household water consumption.

Accessessories for Perfect & Pure RO

What's Included

Your Perfect & Pure system includes the components needed for the under-sink RO installation:

  • Perfect & Pure tankless RO system
  • Sediment/carbon/polishing/remineralization cartridge
  • 1000 GPD RO membrane
  • Feed-water adapters
  • Quick-connect adapters and fittings
  • Drain saddle
  • Color-coded tubing
  • Power transformer
  • Collet tool
  • Teflon tape

Tankless RO Installation Diagram

Especially Useful for Challenging Water

Not every home needs reverse osmosis. But when source water has particularly high dissolved solids, hardness, salts or other water-quality concerns, RO can provide a level of purification that ordinary carbon filtration alone cannot.

The Perfect & Pure Tankless Reverse Osmosis System gives you that powerful purification in a much more convenient format — fast, compact, tankless and remineralized.